8 x 10 Guard Booth-Security Booth

8 x 10 Guard Booth-90MPH Zone8 x 10 Guard Booth-Scale Booth-Operator Booth-120MPH Zone
Request For QuoteRequest for Quote
8 x 10 Guard Booth-90 MPH Zone
8 x 10 Guard Booth-90 MPH Zone
8 x 10 Guard Booth-Operator Booth-Scale Booth-120MPH Zone
8 x 10 Guard Booth-Operator Booth-Scale Booth-120MPH Zone
8 x 10 Guard Booth-Interior
8 x 10 Guard Booth-Interior
8 x 10 Guard Booth-Operator Booth-Scale Booth-120MPH Zone-Interior
8 x 10 Guard Booth-Operator Booth-Scale Booth-120MPH Zone-Interior
Drawings-8 x 10 Guard Booth-90MPH ZoneDrawings-8 x 10 Guard Booth-Operator Booth-Scale Booth

Prefabricated 8 x 10 Guard Booth-Security Booth specifications:

HEATING/VENTILATION/AIR CONDITIONING

8 x 10 Guard Booth-Security Booth-Ocean Spray Distribution Center
8 x 10 Guard Booth-Security Booth-Ocean Spray Distribution Center

HEAT:   3000 WATT ELECTRIC WALL HEATER WITH FAN – DEDICATED CIRCUIT

COOL:   8,000 BTU WALL MOUNTED A/C UNIT – DEDICATED CIRCUIT

OPTIONS: 12,000 BTU THROUGH WALL-HEAT/AIR COMBO UNIT

BASE FRAME:  8 x 10 Guard Booth

MAIN BEAMS:  6” STEEL “C” CHANNEL 5.4 LBS PER FT

TYPE:                PERIMETER

XMEMBER:  2” X  2″ STEEL ANGLE – 24” O.C.

FORK LIFT POCKETS: 7” x 3”- REINFORCED STEEL FORK SLOTS- 32” ON CENTER

ANCHOR POINTS: (4) ¼” X 3” X 3” STEEL ANGLE WELDED TO BASE FRAME-EACH CORNER-PRE-DRILLED 5/8″ HOLE

COATING: TWO PART EPOXY-SHERWIN WILLIAMS MACROPOXY 646 MARINE PROTECTIVE

FLOOR:

INSULATION: R-12 RIGID FOAM

8 x 10 Guard Booth-Security Booth-Walmart Distribution Center
8 x 10 Guard Booth-Security Booth-Walmart Distribution Center

DECKING:       3/4” PLYWOOD-TECH SCREWED TO STEEL MEMBERS

FLOOR COVERING:   3/16″ ALUMINUM TREAD PLATE

OPTIONS: 3/16″ STEEL TREAD PLATE

WALLS:

STUDS:            2X4 FRAMING @16” O.C.

PLATES:          SINGLE 2”X4” TOP AND SINGLE BOTTOM

SHEATHING:  7/16” OSB SHEATHING FASTENED TO STUDS

INTERIOR WALL COVERING:     1/8” VINYL COVERED PANELING – STANDARD COLOR

INSULATION: 3 ½” R-13 KRAFT FACED

BASE TRIM:    4” COVE BASE

EXTERIOR SIDING:           .019 VERTICAL ALUMINUM-LIGHT GRAY (exterior fasteners to be stainless)

EXTERIOR TRIM:               .019 ALUMINUM- DARK GRAY-TOP AND BOTTOM

OPTIONS: 3″ X 3″ STEEL TUBE CORNERS WITH TOP SUPPORTS-HIGH WIND/SEISMEC REGIONS

OPTIONS: FRP-FIBER REINFORCED PANELS

OPTIONS: CUSTOM EXTERIOR COLOR

ROOF:

TYPE: WOOD RAFTERS 2 X 8 @ 16” O.C. – BOWED TYPE-SOFFIT VENTS

OVERHANG: 3” ALL SIDES

SHEATHING:  ½” CDX PLYWOOD

INSULATION: R-30 KRAFT FACE

CEILING:         2 X 4 “T” GRID DROP TYPE – 92” FROM EXISTING FLOOR

ROOFING:       EPDM RUBBER – BLACK

GUTTER:         ¾” ALUMINUM “J” RAIL

DOORS:

EXT. DR:  (1) 36” X 80” FOAM INSULATED STEEL-ALUMINUM FRAME- 22” X 36” VISION & LOCKSET

HARDWARE: ENTRANCE LOCKSET KNOB TYPE

HARDWARE: HEAVY DUTY CLOSER-STAINLESS HINGES

OPTIONS: 36″ X 80″ TOP SUSPENDED-SLIDING-INSULATED STEEL-22″ X 36″ VISION-HOOK BOLT LOCK

WINDOWS:

STD: (3) 36″ X 39″ HORIZONTAL SLIDER-WHITE VINYL FRAME-DOUBLE GLAZED-INSULATED-TEMPERED

STD:  (3) 36″ X 39″ FIXED-WHITE VINYL FRAME-DOUBLE GLAZED-INSULATED-TEMPERED

OPTIONS: FILM TINT

OPTIONS: LOW E GLASS

ELECTRIC:

LOAD CENTER: FLUSH MOUNT EXTERIOR (1) 120/240V. SINGLE PHASE 100 AMP MAIN-12/24 SPACE

LIGHTS:          (1) 2’ X 4’ DROP IN TYPE FLUORESCENT

EXTERIOR LIGHTS: (1)150 WATT QUARTZ HALOGEN SECURITY LIGHT

SWITCH:         (2) 120V, 15AMP TOGGLE – GROUNDED

RECEPTS:       (2) 120V 20 AMP DUPLEX TYPE – GROUNDED

RECEPTS:       (1) 120V 15 AMP DEDICATED FOR A/C

RACEWAY:     14/2 & 12/2 WITH GROUND COPPER BX – METAL JACKET

THERMOSTAT:   ON AC & WALL HEATER

OPTIONS: LED LIGHTS-INTERIOR/EXTERIOR

OPTIONS: ADDITIONAL RECEPTS-GFCI RECEPT

OPTIONS: ADDITIONAL EXTERIOR SECURITY LIGHT

FURNISHINGS:

DESK TOP/COUNTER: 2’ X 7’-4” LAMINATED WHITE-30” AFF

OPTIONS: STEEL COUNTER-FILE CABINET

Request For Quote