4 x 8 Guard Booth-Security Booth

4 x 8 Guard Booth-Plan A-Standard4 x 8 Guard Booth-Plan A-Upgrades
Request For QuoteRequest For Quote
4 x 8 Guard Booth-Plan A-Standard
4 x 8 Guard Booth-Plan A-Standard
4 x 8 Guard Booth-Plan A-Upgrades
4 x 8 Guard Booth-Plan A-Upgrades
Drawings-4 x 8 Guard Booth-Plan A-StandardDrawings-4 x 8 Guard Booth-Plan A-Upgrades

4 x 8 Guard Booth-Plan B-Standard4 x 8 Guard Booth-Plan B-Upgrades
Request for QuoteRequest For Quote
4 x 8 Guard Booth-Plan B-Standard
4 x 8 Guard Booth-Plan B-Standard
4 x 8 Guard Booth-Plan B-Upgrades
4 x 8 Guard Booth-Plan B-Upgrades
Drawings-4 x 8 Guard Booth-Plan B-StandardDrawings-4 x 8 Guard Booth-Plan B-Upgrades

Prefabricated 4 x 8 Guard Booth-Security Booth specifications:

HEATING/VENTILATION/AIR CONDITIONING

4 x 8 Guard Booth-Plan B-Upgrades
4 x 8 Guard Booth-Plan B-Upgrades

HEAT:   1,500 WATT ELECTRIC WALL HEATER WITH FAN – DEDICATED CIRCUIT

COOL:   6,000 BTU WALL MOUNTED A/C UNIT – DEDICATED CIRCUIT

OPTIONS: 8000 BTU THROUGH WALL,-8000 BTU HEAT/AIR COMBO UNIT

BASE FRAME:  4 x 8 Guard Booth

MAIN BEAMS:  4” STEEL “C” CHANNEL 5.4 LBS PER FT

TYPE:                PERIMETER

XMEMBER:  2” X  2″ STEEL ANGLE – 24” O.C.

FORK LIFT POCKETS: 7” x 3”- REINFORCED STEEL FORK SLOTS- 32” ON CENTER

ANCHOR POINTS: (4) ¼” X 3” X 3” STEEL ANGLE WELDED TO BASE FRAME-EACH CORNER-PRE-DRILLED 5/8″ HOLE

COATING: TWO PART EPOXY-SHERWIN WILLIAMS MACROPOXY 646 MARINE PROTECTIVE

FLOOR:

INSULATION: OPTIONAL R-12 RIGID FOAM

4 x 8 Guard Booth-Plan A-Standard
4 x 8 Guard Booth-Plan A-Standard

DECKING:       3/4” PLYWOOD-TECH SCREWED TO STEEL MEMBERS

FLOOR COVERING:   ¼” BLACK COMMERCIAL RUBBER

OPTIONS: ALUMINUM TREAD PLATE-STEEL TREAD PLATE

WALLS:

STUDS:            2X4 FRAMING @16” O.C.

PLATES:          SINGLE 2”X4” TOP AND SINGLE BOTTOM

SHEATHING:  7/16” OSB SHEATHING FASTENED TO STUDS

INTERIOR WALL COVERING:     1/8” VINYL COVERED PANELING – STANDARD COLOR

INSULATION: 3 ½” R-13 KRAFT FACED

BASE TRIM:    2” COVE BASE

EXTERIOR SIDING:           .019 VERTICAL ALUMINUM-LIGHT GRAY (exterior fasteners to be stainless)

EXTERIOR TRIM:               .019 ALUMINUM- DARK GRAY-TOP AND BOTTOM

OPTIONS: 3″ X 3″ STEEL TUBE CORNERS WITH TOP SUPPORTS-HIGH WIND/SEISMEC REGIONS

OPTIONS: FRP-FIBER REINFORCED PANELS

OPTIONS: CUSTOM EXTERIOR COLOR

ROOF:

TYPE: WOOD RAFTERS 2 X 4 @ 16” O.C. – FLAT TYPE

OVERHANG: 6” ALL SIDES

SHEATHING:  ½” CDX PLYWOOD

INSULATION: R-13 KRAFT FACE

CEILING:         2 X 4 “T” GRID DROP TYPE – 92” FROM EXISTING FLOOR

ROOFING:       EPDM RUBBER – BLACK

GUTTER:         ¾” ALUMINUM “J” RAIL

OPTIONS: BOWED TYPE ROOF WITH 2 X 8 RAFTERS-R-30 INSULATION

OPTIONS: 12″ OR 24″ OVERHANG

DOORS:

EXT. DR:      (1) 36” X 80” FOAM INSULATED TRAILER TYPE DOOR WITH 14” X 14” VISION & LOCKSET

HARDWARE: ENTRANCE LOCKSET KNOB TYPE

HARDWARE: STAY CHAIN WITH ALUMINUM DRIP CAP AND SADDLE

OPTIONS: 36″ X 80″ INSULATED STEEL-22″ X 36″ VISION-LOCK-HEAVY DUTY CLOSER- LOCK-STAINLESS HINGES

OPTIONS: 36″ X 80″ TOP SUSPENDED-SLIDING-INSULATED STEEL-22″ X 36″ VISION-HOOK BOLT LOCK

WINDOWS:

STD SIZE: (5) 36” X 39” HORIZONTAL SLIDER–WHITE ALUMINUM FRAME-SINGLE GLAZE-TEMPERED

OPTIONS: 36″ X 39″ HORIZONTAL SLIDER-WHITE VINYL FRAME-DOUBLE GLAZED-INSULATED-TEMPERED

OPTIONS: 36″ X 39″ FIXED-WHITE VINYL FRAME-DOUBLE GLAZED-INSULATED-TEMPERED

OPTIONS: FILM TINT

OPTIONS: LOW E GLASS

ELECTRIC:

LOAD CENTER: FLUSH MOUNT INTERIOR (1) 120/240V. SINGLE PHASE 100 AMP MAIN

LIGHTS:          (1) 2’ X 2’ DROP IN TYPE FLUORESCENT

EXTERIOR LIGHTS: (1)150 WATT QUARTZ HALOGEN SECURITY LIGHT

SWITCH:         (2) 120V, 15AMP TOGGLE – GROUNDED

RECEPTS:       (2) 120V 20 AMP DUPLEX TYPE – GROUNDED

RECEPTS:       (1) 120V 15 AMP DEDICATED FOR A/C

RACEWAY:     14/2 & 12/2 WITH GROUND COPPER BX – METAL JACKET

THERMOSTAT:   ON AC & BASE HEAT

OPTIONS: LED LIGHTS-INTERIOR/EXTERIOR

OPTIONS: ADDITIONAL RECEPTS

OPTIONS: ADDITIONAL EXTERIOR SECURITY LIGHT

FURNISHINGS:

DESK TOP/COUNTER: 2’ X 3’-4” LAMINATED WHITE-30” AFF

OPTIONS: STEEL COUNTER-FILE CABINET

Request for Quote